Winland WB200 Winland WB-200 Waterbug 200 Electrical Water Detection Device

*Key Features of the Water Detection Device:*

- Designed to monitor water presence and can also detect water absence.
- Comes with a standard unsupervised surface sensor included (type W-S-U).
- Supports up to six surface sensors in total; additional W-S-U sensors are available for purchase separately.
- Optimal sensor placement allows 1 to 2 sensors to be positioned up to 200 feet (60.96 meters) away, or 3 to 6 sensors up to 100 feet (30.48 meters) for extensive area coverage. Use 18-22 AWG twisted pair wiring for extending sensors from the main unit.
- This is a hard-wired unit, which should not be connected to earth ground to avoid detection failures or ground faults.
- Requires power supply of 8 to 28V DC at 35mA or 12 to 28V AC at 100mA.
- Suitable for use within an operating temperature range of 32 to 130°F (0 to 54°C) in non-condensing indoor environments only.
- Provides output via 1 Form C relay (N.O./N.C.) rated at 30V DC/1 Amp resistive or 24V AC/1 Amp resistive.
- Compact dimensions measuring 4.1 inches by 2.36 inches by 1.18 inches (10.4 cm x 6.0 cm x 3.0 cm).