Description
This dual-frequency, two-channel receiver is optimized for gate operator systems and can be powered by 12-24 volts DC or AC. It supports both 300 MHz and 310 MHz frequencies, making it compatible with standard Multi-Code and Stanley Multi-Code transmitters, respectively. The receiver includes an 11-inch wire whip antenna for local signal reception, and comes with a 3-foot coaxial cable and a bulkhead connector for remote antenna mounting inside shielded metal enclosures, such as gate operator housings. The receiver also supports an external remote whip antenna for enhanced reception range.
The receiver’s dual-frequency capability is managed via an internal jumper, allowing users to switch between the 300 MHz and 310 MHz frequencies. The operator can supply power through the gate operator or use a separate AC power transformer or DC power supply. Its normally open relay outputs are capable of switching up to 1 amp at 30 VAC, and it comes with 3-foot, 2-conductor wire leads with spade lugs for direct connection to the gate operator’s radio activation terminals.
Programming is straightforward with a 9-position coding switch. When a transmitter set to the same code is triggered, the receiver’s output will activate, thereby controlling the gate operator. Additionally, the transmitter’s switch #10 determines which receiver channel will engage. This model is exclusively compatible with Multi-Code and Stanley Multi-Code transmitters, ensuring seamless integration with existing systems.
